真空導入新手求助

akacolin

公司實驗室要做真空導入制造碳纖維汽車蓋，從設備購買到材料準備都剛開始，請問大家，真空導入設備都有哪些？包括哪些廠家還有真空導入都需要哪些輔助材料？

samwu001

據我現在使用的一些材料設備 工藝等等
找個輔材的廠家都可以給你指導或搞定

akacolin

沒人。。。。。。。

blade

我好像幫過你了，所以我啥也不說，嘿嘿

caefinder

Basically, SALT is a programming language that comes with a set of libraries for general purpose programming and modules that give it access to the internals of RTM-Worx. Those libraries, called the Application Programming Interface, or API for short, allow you to develop your own simulation tools, or even customize the calculation itself!
The possibilities are endless, here is a short list of examples:
•    Model based control (the goal in COMPROME);
•    Generate parametric models;
•    Implement dynamic boundary conditions: complex pressure or temperature boundary conditions at a gate, possibly controlled by 'virtual sensors', e.g. by checking the flow front, pressure in a specific spot or any other condition that may exist and adjusting the conditions at the inlets, vents, the mould temperature etc.
•    Automate a parameter study, calculate statistics in SALT;
•    Write a script to demonstrate your results in RTM-Worx. Add fancy zooming, panning, load several models and animate them individually etc.
•    Connect SALT to your injection machine.
This list is by definition not complete: someone will come up with some use for SALT that we never thought of. At least, that is the idea.

guoguor

可以找我們天能公司呀, 我們提供全面的技術支持. 歡迎到我們這里參觀, 指導.
我的電話: 15162680045 郭先生 [s:1]  [s:1]

yingxd

有很多，可以聯系我QQ754151818

歐陽

不妨詢下上海瀝高，或許能有新的發現

lihui

聯系：QQ506267896

lihui

設備需要：真空泵、樹脂收集器、真空數顯表（檢測真空度，很有經驗當然不用也可以）
輔材：真空袋膜、導流網、脫模布、纏繞管（導氣）、導樹脂管、與導樹脂管相匹配的三通、真空密封膠、帶孔隔離膜（可不用）、常用脫模材料，等等[s:1]
加油，做精才好